If your battery seems to be draining too quickly, there are some things you can do to extend the length of time between charges. Begin by swiping the screen down from the top to access the notification bar. Review the selected icons and turn off any that you aren’t using. Next, check your display settings.

How long should an Alcatel battery last?

Battery Tips Note: This device has a Standby time up to 13.2 days, and a Use/Talk time up to 12 hours. For information about charging your battery, see the Charge the Battery tutorial. TURN ON BATTERY SAVER MODE: From the Battery screen, select the Battery-saver switch.

How long does the Alcatel flip phone battery last?

7 hours, 48 minutes
Alcatel Go Flip 3 Specs

Operating SystemOther
Screen Size2.8 inches
Screen Resolution320 by 240 pixels
Camera Resolution (Rear; Front-Facing)2MP
Battery Life (As Tested)7 hours, 48 minutes (talk time)

Why is my Alcatel phone not charging?

Verify that your phone, charging port, and battery contacts are not damaged. Carefully inspect your phone to be sure it’s not overheating, swollen or damaged. Carefully inspect your phone’s charging port and remove any debris. Remove the battery.

How long does an Alcatel flip phone battery last?

Battery: Built to last The removable 1,350mAh battery pack is pretty sizable for a flip phone, and Alcatel estimates up to eight hours of talk time and 280 hours (nearly 12 days) of standby time.

How to unlock Alcatel?

Power on your Alcatel device with a foreign sim card

  • Phone will prompt for “Sim Network Unlock Pin” or “Unlock Code”
  • Enter the unlock code provided
  • Your phone is now unlocked!

    • How do I Reset my Alcatel One Touch phone?

    Resetting on a Touchscreen Alcatel Phone Turn off the phone. Press and hold the Volume Up button and Power button at the same time. Select your language by tapping on the desired option. Tap on “Wipe data/factory reset” option. Select “Yes – – delete all user data.” Selecting this option will delete all user data.

    How to use Alcatel flip phone?

    Choose the preferred language. This is the first step. By default,English will be selected.

  • Connect to a Wi-Fi network. The next step is connecting to the internet. Select the network you want to join by pressing the OK key.
  • Enter the password. If a password is required for the Wi-Fi,you will be prompted to enter it on the available field.
  • Hit “Next” to continue. Press the key below “Next” to go to the next step.
  • Read the anti-theft information. The next step is the anti-theft message. Read then press the OK key to continue.
  • Accept the license term. This step displays the KaiOS License Terms. Press the key below “Accept” to accept the terms.
  • Arriving on the main screen. That’s the end of the setup wizard. Welcome! Now you are arriving at the main screen and you can start using your phone.